Sample GD-77 DMR Code Plug
- Category: Technical Articles
- Published: Wednesday, 16 October 2019 14:05
- Written by Chris N3PLM
- Hits: 10252
Here is a sample code plug for the GD-77
It is written on software release 3.1.1 and firmware 3.2.1
But I think it will work on most releases.
The programming software can be downloaded from the radioddity web site.
It has 2 zones
The first is the Phil/Rox repeater and the 8804 talk group
The second is for a n OpenSpot2 and Brandmeister
All someone would have to do is fill in their call sign / Name in the boot menu
And their call sign and DMR number in the menu
I did find two firmware bugs
- You must first unlock the frequency (Directions are in the download from Radioditty)
- You must change the standby box in the menu screen from double double to double single.
I added the Warminster analog repeater in a third zone.
Chris - N3PLM